Home / Call Flows / LTE / LTE Mobility and Handover Procedures

LTE Mobility and Handover Procedures

LTE mobility and handover procedures show how service continuity is maintained as a UE moves between LTE cells, frequency layers, interfaces, and radio technologies. Use this hub to jump into intra-LTE handover, X2 and S1 handover, inter-RAT mobility, measurement-controlled handover, conditional handover, and handover failure recovery call flows.

What This Covers

LTE mobility procedures keep service continuity as the UE moves between cells, frequencies, and radio technologies.

Handover call flows may use X2, S1, measurement reports, inter-RAT preparation, or conditional execution depending on the scenario.

Use the links below to jump directly into intra-LTE, X2, S1, inter-RAT, measurement-controlled, conditional handover, and recovery call flows.

Intra-LTE Mobility

Procedures that move the UE between LTE cells while staying inside LTE service.

Handover by Interface Type

Procedures grouped by the interface used to coordinate the handover.

Inter-RAT Mobility

Procedures that move the UE between LTE and other radio technologies.

Handover Control and Recovery

Procedures that control handover decisions or recover when mobility does not complete cleanly.

Related LTE Paths