VoLTE was in bad limelight because of it’s battery performance issues. I wrote an article how VoLTE will consume twice battery than traditional voice calls. The study was done by Metrico Wireless using LG Connect 4G on MetroPCS network. ST Ericsson provided a new white paper which clarifies all doubts around VoLTE. Without VoLTE CDMA/LTE systems suffer a severe penalty (more ..)
What is carrier aggregation and how this will help in improving bandwidth and throughput? ITU set specific requirements for IMT Advanced compliant technology should fulfill. Some of these requirements include at least 40 MHz bandwidth, peak spectral efficiency of 15 bit/s/Hz in downlink and 6.75 bit/s/Hz in uplink and control plane and user plane latency of less than 100 and (more ..)
LTE logical channels structure and mapping between logical channels and transport channels. Logical channels reside between RLC sublayer and MAC sublayer which are layer 2 protocols in LTE protocol stack. Logical channels tells what kind of information is transferred. Logical channels can be broadly divided into two types: Control Channels (for the transfer of control plane information) Traffic Channels (for (more ..)
Qualcomm unveiled two new application processors to power future mobile hardware. Like their predecessors Snapdragon 600 and Snapdragon 800 come with power packed features for fast performance and better battery life. Qualcomm Snapdragon 600 Features Quad Core Krait 300 CPU running up to 1.7 GHz Adreno 320 GPU – offering over 3x the performance of A225 &, as the first (more ..)
RLC is a layer 2 protocol in LTE UE and NodeB. RLC – Radio Link Control protocol is a data link layer protocol. RRC (Radio Resource Control) is generally controls RLC configuration via RRC-RLC SAP. A RLC entity receives/delivers RLC SDUs from/to upper layer and ends/receives RLC PDUs to/from its peer RLC entity via lower layers. If RLC entity configured (more ..)
What is RSRP (Reference Signal Received Power ) in LTE? When RSRP is is applicable in LTE systems? Reference signal received power (RSRP), is defined as the linear average over the power contributions of the resource elements that carry cell-specific reference signals within the considered measurement frequency bandwidth. For RSRP determination the cell-specific reference signals R0 shall be used. If (more ..)
What is RSCP (Received Signal Code Power) in LTE? When is RSCP applicable in LTE system? UTRA FDD CPICH RSCP RSCP (Received Signal Code Power), the received power on one code measured on the Primary CPICH. The reference point for the RSCP shall be the antenna connector of the UE. If Tx diversity is applied on the Primary CPICH the (more ..)